You are here

Safety air gun 500 with Micro nozzles

Safety gun 500-M has a micronozzle. By combining the 500 grip and a stainless steel micronozzle you can save substantial amounts of compressed air in many applications. In most cases more blowing force and energy are used than necessary. The blowing force generated by a micronozzle is often more than adequate, even for general purpose blowing. A central hole in combination with surrounding slots makes the nozzle extremely efficient and quiet. Compared with conventional air guns without a nozzle, an Impact micronozzle permits you to reduce compressed air consumption by up to 75% and at the same time keep the noise level under 76 dB(A). The guns are also available with an extended trigger lever, which must be ordered separately. Patented.

500-MJ6

500-MJ4

Replaces open pipe: ø2mm(5/64'')
Air consumption:4Nm³/h(2.4 scfm)
Sound level:76dB(A)
Blowing force:0.9 N(3.2 oz)
Max temp.:70ºC(158ºF)
Weight:145g(0.32lbs)
Connection:1/4'' BSP(1/4''-18 NPT)female
Nozzle material:Stainless steel

Fully meets the EU Machine Directive’s noise limitation requirements and OSHA’s safety regulations.