Dispersion nozzles

Silvent’s dispersion nozzle generates a broad and circular air cone pattern. This nozzle has been designed for applications where air must be spread over a greater area at a short blowing distance. The nozzle works best when the blowing distance does not exceed 150 mm (6”). When blowing inside pipe and ducts the inside diameter should be between Ø 25 - 100 mm (1” - 4”). The standard exhaust angle is 45°. However the design of the nozzle permits the angle of the exhaust holes to be modified. Upon request, angles of 90° or 135° can be manufactured. The nozzle provides both low noise level and air consumption. Meets OSHA safety regulations. Patented.

915

915

Replaces open pipe:ø6mm(1/4'')
Air consumption:38Nm³/h(22.4scfm)
Sound level:86dB(A)
Blowing force:5.5N(19.4oz)
Max temp.:400ºC(752ºF)
Weight:20g(0.044lbs)
Connection:1/4'' BSP(1/4''-18 NPT)female
Nozzle material:Stainless steel

Fully meets the EU Machine Directive’s noise limitation requirements and OSHA’s safety regulations.

Available in 

  • standard exhaust angle 45°
  • exhaust angle 90°
  • exhaust angle 135°
915