Quality, Integrity, Knowledge, and Service is what we offer!
Back blow nozzles
Silvent’s back-blow nozzle is used for blowing clean inside pipes or channels. Cleaning out pipe during and after tooling has always been a problem. Blowing clean using conventional methods is impossible as chips are blown further into the pipe rather than out. Silvent’s back-blow nozzle can handle blow-out of pipe diameters of up to 400 mm (16”). The nozzles are based upon and manufactured in accordance with Silvent’s patents, which means that both noise level and air consumption are kept to a minimum. Patented.
910
| Replaces open pipe: | ømm | () | |
| Air consumption: | 38Nm³/h | (22.4scfm) | |
| Sound level: | 86dB(A) | ||
| Blowing force: | 5.5N | (19.4oz) | |
| Max temp.: | 250ºC | (482ºF) | |
| Weight: | 14g | (0.03lbs) | |
| Connection: | 1/4'' BSP | (1/4''-18 NPT) | female |
| Nozzle material: | Stainless steel |
Fully meets the EU Machine Directive’s noise limitation requirements and OSHA’s safety regulations.
910.pdf49.6 KB 
912
| Replaces open pipe: | ømm | () | |
| Air consumption: | 91Nm³/h | (53.6scfm) | |
| Sound level: | 90dB(A) | ||
| Blowing force: | 13.2N | (46.6oz) | |
| Max temp.: | 250ºC | (482ºF) | |
| Weight: | 215g | (0.47lbs) | |
| Connection: | 1'' BSP | (1''-11 1/2 NPT) | female |
| Nozzle material: | Steel |
Fully meets the EU Machine Directive’s noise limitation requirements and OSHA’s safety regulations.
912.pdf49.6 KB 