You are here



Design Pressure:580 PSIG(40 Bar)
Condensate level:Non-Visible
Dimensions (WxDxH): 3.7'' x8.7'' x6.5''94mm x 214mm x 163mm
Fluid Temp (Min - Max):34°F - 140°F1°C - 60°C
Inlet Connection:1/2'' NPT
Discharge Connection:1/2'' NPT
Weight:4.4 lbs.2 kg
Valve type:Diaphram - Solenoid
For flows up to:1236 SCFM

Suitable for unattended draining of compressed air dryers, aftercoolers, receivers and other pressure vessels.


Electronically level-controlled condensate drain for compressed air networks. – functions without unnecessary loss of compressed air and with minimal energy input.


Empty state: Empty state: Condensate trickles through the inlet opening (1) and collects in the container (2). The diaphragm valve is closed, since the pilot supply line (3) and the solenoid valve (4) ensure pressure compensation above the valve diaphragm . The larger surface area above the diaphragm (5) results in a high closing force, so that the valve seat is tight and leakproof.


Filled state: When the container (2) has filled with condensate and the capacitive level sensor (6) signals at the maximum point, the solenoid valve is energized and the area above the valve diaphragm is vented. The valve diaphragm lifts off the valve seat (7) , and the pressure in the housing forces the condensate into the discharge pipe (8).