| |
 Air nozzles
|
915 |
« Back To Menu |
|
|
|
|
PRODUCT INFORMATION
|
| |
Silvent’s dispersion nozzle
generates a broad and circular air cone pattern. This nozzle has
been designed for applications where air must be spread over a
greater area at a short blowing distance. The nozzle works best when
the blowing distance does not exceed 150 mm (6”). When blowing
inside pipe and ducts the inside diameter should be between Ø 25 -
100 mm (1” - 4”). The standard exhaust angle is 45°. However the
design of the nozzle permits the angle of the exhaust holes to be
modified. Upon request, angles of 90° or 135° can be manufactured.
The nozzle provides both low noise level and air consumption. Meets
OSHA safety regulations. Patented. |
|
| Replaces open pipe: |
ø6mm |
(1/4") |
|
| Air consumption: |
38Nm³/h |
(22.4scfm) |
|
| Sound level: |
86dB(A) |
|
| Blowing force: |
5.5N |
(19.4oz) |
|
| Max temp.: |
400ºC |
(752ºF) |
|
| Weight: |
20g |
(0.044lbs) |
|
| Connection: |
1/4" BSP |
(1/4"-18 NPT) |
female |
| Nozzle material: |
Stainless steel |
|
| |
| Fully meets the EU Machine
Directive's noise limitation requirements and OSHA's safety
regulations. |
| |
Supply pressure: 500 kPa ( 72 psi ),
measured just before the nozzle
Sound level is measured at
a distance of i m ( 39.37") from the nozzle,
with the
microphone held perpendicular to the direction of the air
stream |
| |
|
 |
View technical data-sheet in
pdf-format. | |
| | |
| |
|
| |
Compressed Air Management Impact RM Inc.
1051 Ave Saint Charles, Suite 107, Vaudreuil-Dorion, Quebec,Canada J7V8P5
Toll Free in USA and Canada
1 800 463-1385
TEL (450) 424-1385 - FAX: (450) 424-6623
Email: info@impactrm.com
Home -
Air Products - Services - Glossary of terms - Training- Money savers
CD ROM - Something to crow about - Contact
Us - Rail Products -Industrial
Products -