| |
Silvent's FLEXARM system is
specially designed for applications where the blowing angle must be
readjusted continuously. In cases where the Flexblow hose has
certain limitations due to its design, Flexarm allows frequent
adjustment. The series consists of 6 different arms that can be
fitted with a variety of blowing nozzles. Choose among nozzle 5001,
0071, 208, 920, 703, and 705 depending on the type of application
and the blowing force required. Flexarms are delivered with a
magnetic base as standard. In cases where magnetic attachment is
unsuitable, a special mounting plate is available. Adjustment of all
joints is easy with a knob and single-handed grip. All Flexarm
models fully meet OSHA safety requirements. Patented. |
|
| Replaces open pipe: |
ø4mm |
(1/8") |
|
| Air consumption: |
19Nm³/h |
(11.2scfm) |
|
| Sound level: |
80dB(A) |
|
| Blowing force: |
3.5N |
(12.4oz) |
|
| Max temp.: |
70ºC |
(158ºF) |
|
| Weight: |
1325g |
(2.91lbs) |
|
| Connection: |
Ø 9 |
(Ø 3/8") |
|
| Nozzle material: |
Zinc |
|
| |
| Fully meets the EU Machine
Directive's noise limitation requirements and OSHA's safety
regulations. |
| |
Supply pressure: 500 kPa ( 72 psi ),
measured just before the nozzle
Sound level is measured at
a distance of i m ( 39.37") from the nozzle,
with the
microphone held perpendicular to the direction of the air
stream |
| |
| Similar products:
293,
296 |
 |
View technical data-sheet in
pdf-format. | |
| | |
Air nozzles
