| |
Silvent’s 920 nozzle and a
specially designed aluminum manifold are used to build air knives.
The length of the manifold and the number of nozzles can be tailored
to each customer’s specific needs. Air knives have been installed in
a wide range of industrial applications. Cooling rollers, drying
tobacco, dispersion of powdered paint, blow-off of emulsions, etc.
are but a few. Three standard lengths are available from stock with
2,4, or 6 nozzles. Meets OSHA safety requirements. Patented. |
|
| Replaces open pipe: |
ø12mm |
(1/2") |
|
| Air consumption: |
180Nm³/h |
(106.0scfm) |
|
| Sound level: |
89dB(A) |
|
| Blowing force: |
33.0N |
(116.5oz) |
|
| Max temp.: |
70ºC |
(158ºF) |
|
| Weight: |
1005g |
(2.21lbs) |
|
| Connection: |
3/8" BSP |
(3/8"-18 NPT) |
female |
| Nozzle material: |
Zinc |
|
| |
| Fully meets the EU Machine
Directive's noise limitation requirements and OSHA's safety
regulations. |
| |
Supply pressure: 500 kPa ( 72 psi ),
measured just before the nozzle
Sound level is measured at
a distance of i m ( 39.37") from the nozzle,
with the
microphone held perpendicular to the direction of the air
stream |
| |
| Similar products:
392,
394
|
 |
View technical data-sheet in
pdf-format. | |
| | |
Air knives
