| |
 Safety air guns
|
520 |
« Back To Menu |
|
|
|
|
PRODUCT INFORMATION
|
| |
Silvent Flexgun 520-580 is
fitted with a bendable hose that can be adjusted to any position.
The hose will not wander, even when blowing at high pressures.
Flexgun is outstanding for blowing deep inside machines and motors
or wherever it is difficult to reach with conventional air guns.
This gun is highly recommended for any blowing applications that is
hard to reach or directly dangerous for the operator. Flexgun allows
you to perform these operations without risking injury to eyes or
hands from flying chips. Patented. |
|
| Replaces open pipe: |
ø4mm |
(5/32") |
|
| Air consumption: |
16Nm³/h |
(9.4scfm) |
|
| Sound level: |
79dB(A) |
|
| Blowing force: |
2.9N |
(10.2oz) |
|
| Max temp.: |
70ºC |
(158ºF) |
|
| Weight: |
195g |
(0.43lbs) |
|
| Connection: |
1/4" BSP |
(1/4"-18 NPT) |
female |
| Nozzle material: |
Zinc |
|
| |
| Fully meets the EU Machine
Directive's noise limitation requirements and OSHA's safety
regulations. |
| |
Supply pressure: 500 kPa ( 72 psi ),
measured just before the nozzle
Sound level is measured at
a distance of i m ( 39.37") from the nozzle,
with the
microphone held perpendicular to the direction of the air
stream |
| |
| Similar products:
2220 |
 |
View technical data-sheet in
pdf-format. | |
| | |
| |
|
| |
Compressed Air Management Impact RM Inc.
1051 Ave Saint Charles, Suite 107, Vaudreuil-Dorion, Quebec,Canada J7V8P5
Toll Free in USA and Canada
1 800 463-1385
TEL (450) 424-1385 - FAX: (450) 424-6623
Email: info@impactrm.com
Home -
Air Products - Services - Glossary of terms - Training- Money savers
CD ROM - Something to crow about - Contact
Us - Rail Products -Industrial
Products -