| |

Silvent 500-Z is fitted
with a slot nozzle of zinc and is suitable for general-purpose
cleaning in environments where the nozzle is subject to little or no
mechanical wear. The nozzle provides strong and extremely quiet
blow-off power. The sound level generated is just 79 dB(A). For more
aggressive environments we recommend our 500-L or 500-S safety guns
with nozzles of stainless steel. The combination of an ergonomic
handle and a short trigger for one or two fingers provides a perfect
grip as well as the possibility to aim the gun with precision and
feeling. The ergonomic design of the handle automatically gives you
the optimal blowing position so that you do not need to bend your
wrist. The trigger mechanism requires a pressure of only 7 N (24.7
oz), which means that the gun can be used frequently without the
risk of taxing muscles. The average fin-ger strength of men is 96 N
(339 oz) and of women, 81 N (286 oz). When less than 10% of the
maximum strength of a finger is used, no injury arises due to muscle
strain. The gun features bottom connection and three possibilities
for hanging. The knurled surface of the gun handle provides a
comfortable and firm grip. Patented. |
|
| Replaces open pipe: |
ø4mm |
(5/32") |
|
| Air consumption: |
19Nm³/h |
(11.2scfm) |
|
| Sound level: |
79dB(A) |
|
| Blowing force: |
3.2N |
(11.3oz) |
|
| Max temp.: |
70ºC |
(158ºF) |
|
| Weight: |
145g |
(0.32lbs) |
|
| Connection: |
1/4" BSP |
(1/4"-18 NPT) |
female |
| Nozzle material: |
Stainless steel |
|
| |
| Fully meets the EU Machine
Directive's noise limitation requirements and OSHA's safety
regulations. |
| |
Supply pressure: 500 kPa ( 72 psi ),
measured just before the nozzle Sound level is measured at
a distance of i m ( 39.37") from the nozzle, with the
microphone held perpendicular to the direction of the air
stream |
| |
| Similar products:500-L,
500-S,
500-P |
 |
View technical data-sheet in
pdf-format. | |
| | |