| |
The
Silvent 007 grip features a
unique valve design with a two-step system that reduces both noise
levels and energy consumption considerably. The first step, variable
position, allows variable adjustment of the blowing force and is
generally more than adequate for most types of work. This generates
a noise level of only 75 dB(A) and permits energy savings of up to
50%. The gun’s second step, the so called “booster position”,
delivers twice the blowing force for the most demanding operations.
From the maximum variable position, only a slight squeeze of the
trigger is needed and the booster position kicks in, instantly
doubling the effect. Despite this dramatic increase in blowing
force, the sound level is only half that of conventional air guns.
The grip offers two connection possibilities – both top and bottom
air supply connection. From a safety and ergonomic perspective, top
feed is the best alternative. Safety valves at the connections
eliminate the risk of injury. Should the plug on the connection that
is not being used for some reason unscrew under pressure, there is
no risk involved. The 007 safety gun has an ergonomically designed
Softgrip handle made of synthetic rubber that is highly durable and
oil resistant. The material insulates well against heat and cold and
the handle is easy on both the hand and wrist. Silvent 007 with a
Laval nozzle is the most commonly chosen alternative. With a
stainless steel Laval nozzle mounted onto the 007 grip, you can
handle nearly any blowing application. A Laval orifice in the center
of the nozzle creates a highly concentrated air stream that moves at
supersonic speed. Around the Laval hole there are a number of
diverging slots that generate a powerful, quiet and laminar airflow.
The combination provides superior cleaning performance and optimal
utilization of the compressed air. The surrounding fins prevent
direct contact between skin and the outlet holes. Patented. |
|
| Replaces open pipe: |
ø4mm |
(5/32") |
|
| Air consumption: |
22Nm³/h |
(12.9scfm) |
|
| Sound level: |
82dB(A) |
|
| Blowing force: |
3.5N |
(12.4oz) |
|
| Max temp.: |
70ºC |
(158ºF) |
|
| Weight: |
190g |
(0.42lbs) |
|
| Connection: |
1/4" BSP |
(1/4"-18 NPT) |
female |
| Nozzle material: |
Stainless steel |
|
| |
| Fully meets the EU Machine
Directive's noise limitation requirements and OSHA's safety
regulations. |
| |
Supply pressure: 500 kPa ( 72 psi ),
measured just before the nozzle
Sound level is measured at
a distance of i m ( 39.37") from the nozzle,
with the
microphone held perpendicular to the direction of the air
stream |
| |
| Similar products:
007-MJ4,
007-MJ5,
007-MJ6
|
 |
View technical data-sheet in
pdf-format. | |
| | |
Silvent safety air guns
