High Sensitivity Regulators

 Impact RM high sensitivity regulators are uniquely suited for point of use applications requiring precise regulation at pressure differentials less than 5 psid. The unique constant bleed internal pilot arrangement provides for superior adjustment resolution with no delay or overshoot. Droop is held to approximately 3 psi throughout the entire rated air flow and repeatability is +0.5 psi. Air bleed is less than 5 scfh and inaudible.

Port NPTF	Diag Model	Primary Pressure	Secondary Pressure	Dim (max) inches A	Dim (max) inches B	Dim (max) inches C	Depth	Weight
1/4 3/8 1/2 3/4	CR200 CR300 CR400 CR600	250 psi	15-100 psi	3 1/2	4 3/16	1 5/16	2 25/32	31 oz

Port NPTF	Diag Model	Primary Pressure	Secondary Pressure	Dim (max) inches A	Dim (max) inches B	Dim (max) inches C	Depth	Weight
3/4 1 1 1/4 1 1/2	CR650 CR850 CR1050 CR1250	250 psi	15-100 psi	4 9/16 4 7/8	4 9/16 5	1 15/16 1 11/16	2 13/16	30 oz 36 0z

Option: High Capacity spring range 15-200 psi

Note: CR Model regulators will control to a minimum secondary pressure of 15 psi and will not shut off tight.