You are here

ADP-1

ADP-1

Design Pressure:120 PSIG(8.2 Bar)
Reservoir Capacity:24 oz(.709 Liter)
Condensate level:Visible
Operated by:Pneumatics
Dimensions (WxDxH): 14.5'' x 6.5'' x 6.5'' 368mm x 165 x 165
Fluid Temp (Min - Max):35°F - 150°F1°C - 65°C
Inlet Connection:3/4''NPT
Discharge Connection:1/2'' NPT
Weight:14lbs.6.3 kg
Valve type:Full ported ball

Suitable for unattended draining of compressed air dryers, aftercoolers, receivers and other pressure vessels.

Can be used in explosion-proof environment

NO AIR LOSS DRAIN
A stainless steel float assembly equipped with a magnetic reed switch rises with the fluid level until its upper limit is reached. At this level, the reed switch signals a pneumatic relay which in turn energizes a cylinder to open a ball valve. As the valve opens, the line pressure forces the fluid in the reservoir to exit. As the float lowers with the reservoir fluid level, a lower limit is reached causing the reed switch to signal the cylinder to close off the ball valve allowing NO AIR to escape

 

STANDARD FEATURES
* Reliable operation
* Low maintenance
* Pneumatic control
* Translucent reservoir
* High Capacity
* No Electricity required
* OPTIONAL FLUID HEATER AVAILABLE FOR SUB ZERO TEMPERATURES

 

ADP-1